**NOTE**
– Universal Fitment, Modifications Needed Depending On Chassis
KLM Ice Box setup is designed to keep the factory AC and Heat Exchanger in place for street driving. You can also remove the AC & Heat Exchanger for track use only if preferred.
Kit Includes:
– KLM Ice Box w/ Billet Pump Bracket (5 Gal)
– KLM Billet Lid
– KLM Billet Passthrough Flange
– Pierburg CWA400 Pump (Modified w/ Fitting)
– Pump Mounting Bracket
– AN Shut-Off Valve
– Water Pump Pigtail
– 1.5″ Hose Coupler (Qty: 1)
– 1.5″ Hose Clamps (Qty: 2)
– 1/8″ NPT Breather Vent (Qty: 1)
– Billet Coolant Block-Off Fitting (Qty: 1)
– 3/4″ T-Fitting (Qty: 1)
– 3/4″ Straight Barb Fitting (Qty: 1)
– 1″ to 3/4″ Barb Reducer (Qty: 1)
– Double Zip-Ties (Qty: 5)
– Mounting Screws (Qty: 2)
– M6 Short Bolts (Qty: 3)
– M8 Long Bolts (Qty: 3)
– M8 Lock Nuts (Qty: 3)
– 16AN 90 Degree Fitting (Qty: 1)
– 16AN 45 Degree Fitting (Qty: 1)
– 12AN 90 Degree Fitting (Qty: 2)
– 10AN 90 Degree Fitting (Qty: 2)
– 10AN 45 Degree Fitting (Qty: 2)
– Push-Lock 16AN 90 Degree (Qty: 1)
– Push-Lock 12AN 90 Degree (Qty: 1)
– Push-Lock 10AN Straight (Qty: 1)
– 16AN Line
– 12AN Line
– 10AN Line
– 16AN Push-Lock Hose
– 12AN Push-Lock Hose
– 10AN Push-Lock Hose
– 1″ Hose Clamps (Qty: 6)
**Attention**
With the configuration shown in the photos it will not work with the factory exhaust due to the size of the muffler. Pass through fitting will need to be relocated to a different location for cars running factory exhaust.
